0 items / $0.00

LOT of 4 - 4 Button Triggered MP3 Players


Image of LOT of 4 - 4 Button Triggered MP3 Players

Quantity 4 included in purchase. These board can have 4 sounds loaded into them with a micro SD card. You can have 4 buttons wired up to activate each sound. Perfect for actor scares and instead of the actor screaming, they can activate a the sound clip. With the 4 buttons, each group coming by can have a different sound effect. Can be used for other uses also! Item description from manufacturer below.

These are Brand New!

Electronics123.com, Inc.
4 Buttons Triggered MP3 Player Board with 10W Amplifier and Terminal Blocks


High quality audio decoder which, supports MP3 and WAV audio formats.
Works with most Windows, Mac, and Linux systems
Sampling rates supported: 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 (KHz).
24 bit DAC output and supports dynamic range 90dB and SNR 85dB.
Supports one-on-one 4 button trigger control mode and RS232 serial port control mode.
In button control mode, it plays back 4 sounds one-on-one by negative triggering.
Uses microSD card and the built-in SPI flash memory as storage.
Built-in 4MB SPI flash memory by default.
Supports max. 32GB micro SD card.
Possible to load audio files to the flash memory directly via the micro USB port. Connecting to a computer is similar to using a USB flash drive with PC.
Built-in mono 10 watt amplifier that can drive a 10 watt (8 ohm) speaker directly. Or 5 watt (if using 4 ohm speaker)
Equipped with a 3.5mm audio jack for stereo output that can drive an earphone directly or to connect with an external amplifier.
Wide range for power input (DC 8-24V).
PCB size: 52mmx49mm
Technical Parameters:

Working voltage: DC 8V-24V
Working current: ≤400mA (Input: DC12V DC)
Working current if playback through headphone jack only: 30mA (Input 12V DC)
Standby current: 10mA (Input 12V DC)
Power Consumption: ≤10W
Onboard flash memory size: 4MB
Audio format: MP3 and WAV